GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable)Best GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable) Cheap. and GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable) Prices in USA.
Few months, we saw a lot of people wearing or using these products. in our opinion, this product is definitely very popular and very good in terms of quality.It does not hurt you to try or buy GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable). because it is based on Review of many people, the product is easy to use, high quality material and many other advantages.
There are also a few close friends I highly recommend this product, so I immediately bought it. And finally last week I decided to buy it, i was very lucky because at the time of purchasing the product GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable), i get a Discount Price or the Best Deals of the store.
Product Description
This USB to TTL Serial Adapter is a full featured, bus powered, USB device that allow any embedded controller to send and receive serial data via the USB bus. The USB to TTL Serial Adapter will allow data rates of up to 3M Baud and features a full set of modem handshaking controls, When used with the (royalty-free) Virtual COM Port Drivers, the USB to TTL Serial Adapter can be interfaced to any serial terminal application as if it is a standard serial port. When combined with the (royalty-free) D2XX drivers, the USB to TTL Serial Adapter can become a powerful serial engine that can be used to interface to any custom applications where high speed serial communications to your embedded project is required. The Cable provides a USB to TTL Serial interface with various end connectors. Single board USB to asynchronous serial data transfer interface Entire USB protocol handled by the electronics in the cable USB UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking Data transfer rates from 300 baud to 3 Mbaud at TTL levels. +3.3V output allows external logic to be powered from the USB port Transmit and receive LEDs UHCI / OHCI / EHCI host controller compatible Low USB bandwidth consumption Driver Chips FTDI Compliant USB Ver 2.0 &1.1 Connector Upstream USB Type A Male Connector Device Mini USB 8P Male Power Mode Bus Cable Length 2m Housing Molding (PVC)
Features
- USB to UART with +3.3V TTL Adapter
- Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
- +3.3V output allows external logic to be powered from the USB port
- Voltage level Supports +3.3V based UART signals and +3.3V / 50mA power output
We are very happy to hear that you had a enjoyable stay at this website. We expect that you will visit this site repeatedly on your following visit. Thank you for the compliments as well as we wish to see you again real soon.
We have searched the web to find the best prices available.Click Hereto find out where to get the best deal on GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable)
Check for Special Price Today!
search result of GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable)